Nordson Test and Inspection will showcase its award-winning Acoustic, Optical, Test, and X-ray Inspection systems during 2021 IPC APEX Virtual EXPO

Nordson Test and Inspection will exhibit at the Virtual IPC APEX EXPO, scheduled to take place March 9-11, 2021 online at Visit the “booth” here to learn more about Nordson’s comprehensive range of Test and Inspection systems including:

DAGE Assure Flex Automation
The new generation of component counting. Assure Flex Automation
is the fully automatic, operator free reel counting solution. Tailored
to your specific needs, a broad spectrum of loading and
unloading options are available for high throughput stand-alone
operation. Assure Flex can also be integrated into a wide range of high
capacity storage systems.

Assure Flex is the complete counting solution for every workflow, from walk up operator loading to inline operator free. Assure Flex has an integrated conveyor and can be easily connected to the modules of the Assure Flex Series. 


The X series is MATRIX’s high-speed AXI platform. It comes with linear drives for the table axes and detector axes. This motion system guarantees very high speed and the utmost accuracy for positioning.

It is available with the SMT setup:

  • 130kV, 40W sealed tube
  • 14bit FPD with 50µm pixel pitch

The X series machines feature the following configurations/imaging techniques:

  • X2: 2D + SFT
  • X2.5: 2D + off-axis (2.5D) + SFT
  • X3: 2D + off-axis (2.5D) + Planar CT (3D) + SFT

This platform features the Nordson Planar CT, which was released in October 2020, providing increased slice quality for 3D inspection and decreased cycle time.
The maximum resolution with the X series machines is 3µm, making it the perfect choice for solder joint inspection, for the analysis of the following:

  • BGAs
  • Void
  • QFN
  • QFP


The Gen7 C-SAM inspection system is the latest generation
in Acoustic Micro Imaging. The Gen7 delivers the most
advanced hardware ever available allowing new features and
analysis that can now be completed faster than ever before.

Advanced features such as PolyGate, SonoSimulator,
Virtual Rescanning Mode (VRM) and Frequency Domain
Imaging (FDI) add value and confidence. With its large, easy
access illuminated scanning area, the Gen7 has the capability
to efficiently scan everything from a small part up to 350mm
sized parts.


YESTECH LX-1000 Large Area In-line AOI

The LX-1000 automated optical inspection system offers
high-speed PCB assembly inspection with exceptional defect
coverage, inspecting solder joints and verifying correct part
assembly, enabling users to improve quality and increase throughput.

  • Single or dual sided imaging with full travel imaging sensors
  • 630mm x 630mm large inspection area
  • Optional 3D and/or 2D automated inspection
  • Up to 100 mm clearance
  • Heavy duty conveyor options for samples to 15kg
  • High defect coverage / low false failure rate
  • MES / Industry 4.0 compatible

The Nordson Test and Inspection team looks forward to welcoming visitors to its “virtual” booth and answering any questions about how its market-leading systems can support your business. For more information, visit