
The method of using a positive displacement technology for the dispensing or dosing of liquids can bring
many benefits to those for whom repeatability, precision, reliability and accuracy are important. preeflow®
volumetric dispensing pumps have found applications in sectors such as electronics and semiconductor
manufacturing, aerospace, medical device assembly and pharmaceuticals – from the application of small
quantities (microlitres) of adhesive to the dosing of fluids into vials. The assurance that the dispensed
volume will always be the same to within a high level of tolerance is very valuable to critical processes.
An example of where preeflow’s volumetric dispensing capability meets an industry need is in the
application of adhesive in medical catheter manufacturing. Adhesives are used in the bonding of balloons
and hubs to lumens, marker bands, and manifolds and connectors. This is an industry where accuracy and
repeatability are of paramount importance in achieving a consistent, validated process. Since the nature of
the assembly means that full automation is not always feasible, the bonding process can be manual.
Catheters have small bond areas, and squeeze out or witness of excess adhesive would be unacceptable, so
adhesive placement and amount need to be precise. The use of a preeflow eco-PEN, triggered by a foot
pedal, gives the assembly operator more control of this intricate operation and confidence in the adhesive
amount.
preeflow volumetric pumps dispense from the microlitre range on up, to an accuracy of +/- 1%
independently of viscosity, while exhibiting low shear force on any media. They can dose continuously at
rates up to 60ml per minute. The direction of flow can be reversed leading to clean cut off of the material,
preventing drips or stringing.
For further information please see www.intertronics.co.uk/preeflow or visit their blog at
www.adhere.uk.com – also see www.youtube.com/intertronicsadhere.